Hi there, I'm Udon Pollack. I am passionate about protecting foundations from flood damage. The foundation is the only thing connecting the house to the ground. It keeps the home standing through heavy storms and small land shifts. Every once in a while, foundations will develop cracks that let water seep through the walls. As a result, the basement may flood during the next heavy storm. In addition, water coming through the cracks continues to weaken the foundation. Luckily, people can have their foundations sealed up by a professional to stop this harmful progression. I will teach everyone the basics of flooded basement repairs through this site. Everyone deserves to have a sturdy home set on a strong foundation and I'm here to help people understand how to accomplish that feat. Thanks for visiting my site. Come back soon.
Water damage in homes is caused by problems with plumbing more often than floods and natural disasters. The problem with water in your home may be due to a pipe connection that is leaking, as well as problems like condensation forming on uninsulated pipes. Here are some of the areas of your plumbing system that are likely to be the cause of water damage:
1. Condensation On Uninsulated Pipes That Are Exposed
Condensation is a problem that is often caused by pipes that have not been properly insulated. As the air around a pipe changes temperature, the water in the line may be a different temperature, which causes condensation to form on the lines. This condensation will eventually lead to water problems as it dips and pools. The pipes that are most likely to cause condensation problems are ones that are exposed to outside air, such as in an attic, garage or other unfinished space. Make sure that all the exterior plumbing in your home is insulated to prevent these condensation problems.
2. Adaptors For Different Types Of Pipe Materials That May Leak
Over the years, homes may have a lot of different types of improvements and repairs done to the plumbing. Sometimes, when new plumbing is added to a home, different materials may be used, which need special fittings to connect the two systems. A good example of this is copper being connected to PVC and plastic plumbing systems. These adaptor fittings may leak and need to be replaced or repaired to stop a leak that has started to form.
3. Worn Seals And Gaskets That Need To Be Replaced When Leaks Start
The different plumbing fixtures in your home may also have seals and gaskets that often wear out. An example of these seals are plumbing tape around a flexible water line or the gasket for the drain trap in a kitchen sink. These problems are using easy to repair by replacing the seals or gaskets that have worn out. You may want to have a kit of plumbing ring seals and gasket for the different plumbing fixtures in your home that will need to be repaired. The seals leaks in a plumbing trap beneath the sink is something that often causes leaks in the kitchen.
When you have a problem with water damage in your home, check these areas of plumbing for the source of the problems. When there is a hidden plumbing problem in the walls that requires extensive repairs, contact a demolition contractor or visit a site like http://www.generalcontractorbuford.com to help remove drywall and expose pipes to have repairs and improvements done.